Roofing Services in Erie
What Roof Replacement Includes
A full replacement starts with a roof inspection — deck-level, not from the curb.
We check sheathing, rafters, and truss condition, then write a roof estimate with a clear scope of work.
- Tear-off of existing shingle, underlayment, and any failed flashing
- Deck repair: plywood or OSB replacement where rot or delamination shows
- Ice-and-water shield at eaves and valleys, synthetic underlayment across the field
- New drip edge, pipe flashing, step flashing, and counter-flashing
- Ridge vent and soffit vent balance for attic ventilation
- Magnetic sweep for nail and fastener cleanup, dumpster haul-away
Quality & Materials Standards
Material choice should match the house, not a sales pitch. Architectural shingle handles Erie wind better than three-tab shingle and carries a longer warranty.
Standing-seam panel and metal panel resist hail impact where cosmetic bruising matters less.
Slate, clay tile, and concrete tile suit the custom homes on larger lots but demand a substrate and framing that can carry the weight.
Building code in both counties governs fastening schedules, ice-and-water shield placement, and ventilation ratios.
Skipping ice-and-water shield at the eave is the most common shortcut we find, and it is the one that costs homeowners most after a freeze.
Storm damage claims are a documentation exercise.
A roofer photographs hail damage and wind damage, meets the adjuster, and submits claim documentation that matches the policy coverage. Know your deductible.
Understand depreciation versus replacement cost before you sign. If the first estimate misses decking or flashing, a supplement is normal — not a red flag.
Common Roof Problems in Erie
Local Service Areas
Old Town Erie
Older farmhouses and bungalows near the historic core, where roofs have often been layered rather than replaced.
- Wood shake and cedar shake at end of life, dried and splitting across the rake
- Three-tab shingle over original decking, with soft spots underfoot
- Chimney flashing and apron flashing sealed with tar or roof cement instead of replaced
- Gable and hip transitions where step flashing has pulled away
Vista Ridge
Newer tract construction from the 2000s and 2010s, mostly gable roofs on engineered truss.
- Architectural shingle showing granulated loss and bruising after hail
- Ridge cap and ridge vent lifting in high wind off the Front Range
- Pipe boot and vent boot rubber cracked by UV degradation
- Valley metal and drip edge rusting where gutter overflow backs up
Erie Highlands
Recent subdivision build-out with tight lot spacing and repetitive rooflines.
- Laminated fiberglass shingle on steep pitch, fast to install but hail-sensitive
- Counter-flashing at sidewalls installed short, allowing water behind the siding
- Soffit and fascia damage from ladder access and wind-blown debris
- Downspout and gutter seams leaking into the eave
Saddleback
Larger custom lots with complex rooflines, dormers, and multiple pitch changes.
- Standing-seam panel and metal panel seams opening at thermal movement
- Dormer and skylight flashing as the first leak point in snowmelt
- Ice dam formation at long eave runs with limited ventilation
- Snow guard placement reviewed where sliding snow threatens entryways
Crystal Lakes
Established homes with mature tree cover and shaded roof planes.
- Moss and algae on north-facing asphalt shingle, holding moisture
- Debris-packed valleys and gutters feeding ponding water at the eave
- Modified bitumen on low-slope sections, blistering and cracking
- Rafter and roof deck rot hidden under tree-shade moisture
Coal Creek
Properties near the Coal Creek Trail corridor, mixing older and newer construction.
- Corrugated panel on outbuildings and canopies, fastener-backed and leaking at screws
- Membrane and tpo on flat or low-slope additions, seam failure at edges
- Ridge beam and purlin movement showing as wavy rooflines
- Hail damage on older shingle that insurers may write as depreciation, not replacement